Mitsubishi 2024 TENSEI 1K Pro Red Wood Shaft
- In stock, ready to ship
The release of the TENSEI™ 1K Pro Red - a high-launching, mid-spinning profile - finished the 1k Pro Family. Fitters everywhere now have the full breadth of launch and spin conditions in the 1K Pro line to fit any golfer than walks into his or her studio.
Built with super-premium 1K Carbon Fiber in the handle for exceptional feel and stability, TENSEI 1K Pro Red uses a super-stiff handle section, softer tip section and lower kick point to produce high flight. 1K Pro Red also uses our proprietary Xlink Tech™ Resin System to drive carbon fiber volume way, way up for supreme feel without harming the shaft's strength or durability. A full-length application of aerospace-grade MR70 material is used for strength and the design is capped off with super-premium ultra-strong boron in the tip section.
Key Technology Features:
- Super premium 1K Carbon Fiber for stability during swing
- Xlink Tech Resin System – multi-phase resin, higher strength, lower weight
- MR70 – tensile strength of over 1000 psi
| MODEL | Flex | Length (in) | Weight (g) | Tip OD (in) | Kick Point |
| TENSEI 1K Pro Red 50 | R | 46 | 51 | 0.335 | Low |
| TENSEI 1K Pro Red 50 | S | 46 | 54 | 0.335 | Low |
| TENSEI 1K Pro Red 50 | X | 46 | 56 | 0.335 | Low |
| TENSEI 1K Pro Red 50 | TX | 46 | 57 | 0.335 | Low |
| TENSEI 1K Pro Red 60 | R | 46 | 59 | 0.335 | Low |
| TENSEI 1K Pro Red 60 | S | 46 | 61 | 0.335 | Low |
| TENSEI 1K Pro Red 60 | X | 46 | 63 | 0.335 | Low |
| TENSEI 1K Pro Red 60 | TX | 46 | 65 | 0.335 | Low |
| TENSEI 1K Pro Red 70 | S | 46 | 70 | 0.335 | Low |
| TENSEI 1K Pro Red 70 | X | 46 | 73 | 0.335 | Low |
| TENSEI 1K Pro Red 70 | TX | 46 | 74 | 0.335 | Low |
| TENSEI 1K Pro Red 80 | S | 46 | 80 | 0.335 | Low |
| TENSEI 1K Pro Red 80 | X | 46 | 82 | 0.335 | Low |
| TENSEI 1K Pro Red 80 | TX | 46 | 83 | 0.335 | Low |
Mitsubishi TENSEI 1K Pro Red Tip Trimming Guide |
||||
| Driver | 3 Wood | 5 Wood | 7 Wood | 9 Wood |
| 0" | 0.5" | 0.75" | 1" | 1" |
