Mitsubishi MMT Iron Shaft .355" Taper Tip
Mitsubishi MMT Iron Shaft .355" Taper Tip
Mitsubishi MMT Iron Shaft .355" Taper Tip
Mitsubishi MMT Iron Shaft .355" Taper Tip

Mitsubishi MMT Iron Shaft .355" Taper Tip

$110.00
/
Tip Size
Weight/Flex
Iron
  • In stock, ready to ship
  • Inventory on the way

Born from more than 30-years of composite shaft mastery, the new MMT Taper Iron utilizes a patent pending Metal Mesh Technology (MMT) to redefine the possibilities for feel and performance in a composite iron shaft. A unique metal mesh – made from individually braided strands of 304 Stainless Steel – is integrated into the shaft’s prepreg layers towards the tip. This improves density and stability, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.

 

 
Shaft Name Flex Length (in) Weight (g) Tip O.D. (in) Tip Length (in) Butt O.D. (in) Torque (degrees) Kick Pt.
MMT™ Taper Iron 55 A 39.5"-36.5" 59 0.355 TAPER 0.596 3.5 MID
MMT™ Taper Iron 65 R 39.5"-36.5" 63 0.355 TAPER 0.593 3.5 MID
MMT™ Taper Iron 75 S 39.5"-36.5" 74 0.355 TAPER 0.606 3.7 MID
MMT™ Taper Iron 85 R 39"-35.5" 84 0.355 TAPER 0.596 3.3 MID
MMT™ Taper Iron 85 S 39"-35.5" 88 0.355 TAPER 0.602 3.2 MID
MMT™ Taper Iron 95 S 39"-35.5" 95 0.355 TAPER 0.61 2.9 MID
MMT™ Taper Iron 105 S 39"-35.5" 105 0.355 TAPER 0.598 2.8 MID
MMT™ Taper Iron 105 TX 39"-35.5" 113 0.355 TAPER 0.606 2.8 MID/HIGH
MMT™ Taper Iron 125 S 39"-35.5" 124 0.355 TAPER 0.606 2.8 MID/HIGH
MMT™ Taper Iron 125 TX 39"-35.5" 125 0.355 TAPER 0.608 2.7 MID/HIGH

Pairs well with

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
AD
Shafts

I thought they would be good for me unfortunately they are very board like unless you swing at 100 plus The service was great!!!!!
Top notch *

T
Terry P.
MMT .355 iron shafts

They are my favorite iron shaft, I think the feel is better than steel.

D
David

Great service & shafts

Questions & Answers

Have a Question?

Ask a Question

  • I need to replace the 9-iron mmt 105 shaft. I have matching spare 7-iron shaft and a pw shaft. Should I butt trim the 7-iron shaft or extend the pw shaft by 0.5 inches. Thanks

    Hello, if you wanted to the PW shaft what would just be considered hard stepping.  Installing the 7i would be double soft stepping.

  • Are the taper tip MMT's constant weight and butt trim to fit? Thanks

    Hello, these are .355 taper tip so they are butt trim to length only.

Similar Products